YuXiang Advanced Technology & Materials Co., Ltd

Products
Contact Us

YuXiang Advanced Technology & Materials Co., Ltd
Telephone:0379-62769668
Fax:0379-62769668
E-mail:yxatmg@163.com
Domain:http://www.yxatm.com/en/
Address:XIYUAN High Tech Industry Zone, Luoyang,China

vacuum furnace
Current Location:Homepage - vacuum furnace
Current Category:vacuum furnace

WS191640 High Temperature Vacuum Furnace

 WS191640 High Temperature Vacuum Furnace

WS191640 High Temperature VacuumFurnace Technical Parameters

 

Type

horizontal high temperature, vacuum / atmosphere resistance furnace

Main Power

AC 380V±10%, three-phase four-wire system, 50Hz±1Hz

Total Electric Power Consumption

about 260KW (to be determined according to the final design, determined at the time of checking the design)

Total Heater Power

about 250 KW (to be determined according to the final design, determined at the time of checking the design)

Effective Working Area in the Furnace

480mm X 400mm X 1000 mm (19" × l6" × 40")

Heating Element

 Graphite

Specified Maximum Temperature

2000℃

Maximum Work Temperature

1900℃

Temperature Uniformity

±5t℃(Hold the furnace for 1 hour after heating to 1100℃)

Temperature Control

intelligent temperature control, closed loop PID programmable curve automatic temperature control

Temperature Detection

two C-type armatures with high temperature coating thermocouple + optical pyrometer

Temperature Control Zone

main area control

Program Control

Honeywell HC900 Hybrid Programmable Controller

Operation Method

computer automatic control / on-site manual operation

Heating speed

empty furnace room temperature rising to 1900t and less than 5 hours

Ultimate Vacuum Degree

5. 0E (-1) Pa

Working Vacuum Degree

5. 0E (1) Pa

Empty Furnace Vacuumizing Time

Reaching the working vacuum time<30min (The furnace body is dry and clean)

Pressure Rise Rate

<10Pa/h (tested after continuous vacuumizing for 12h)

Furnace Cooling Method

from 600t: to 60t: to use the external circulation strong cooling system to cool it quickly

Main uses and customers:

It is used for heat treatment of aluminum nitride ceramic substrate firing, aluminum nitride powder sintering,etc.

Reprensentative--Ningxia Ascendus New Material Technology Co., Ltd.